Amer-networks E5 CLI Uživatelský manuál

Clavister cOS CoreCLI Reference GuideVersion: 10.20.02Clavister ABSjögatan 6JSE-89160 ÖrnsköldsvikSWEDENPhone: +46-660-299200www.clavister.comPublishe

optional value. This is because that option has a default value, 100, which will be used if no valueis specified.The following two examples will yield

3.4. ALGThis is a category that groups the following object types.3.4.1. ALG_FTPDescriptionUse an FTP Application Layer Gateway to manage FTP traffic

switches if a virus is found.FileListType Specifies if the file list contains files to allow ordeny. (Default: Block)FailModeBehavior Standard behavio

RemoveApplets Remove Java applets. (Default: No)RemoveActiveX Remove ActiveX objects (including Flash). (Default:No)VerifyUTF8URL Verify that URLs doe

allowed for the host that requested the override.(Default: 300)AllowFilteringReclassification Allow reclassification of sites. (Default: No)Comments T

VerifyContentMimetype Verify that file extentions correspond to the MIMEtype. (Default: No)Antivirus Disabled, Audit or Protect. (Default: Disabled)Sc

MaxSessionsPerId Maximum number of sessions per SIP URI. (Default:5)MaxRegistrationTime The maximum allowed time in seconds betweenregistration reques

type. (Default: No)Antivirus Disabled, Audit or Protect. (Default: Disabled)ScanExclude List of files to exclude from antivirus scanning.(Optional)Com

Used to whitelist or blacklist an email sender/recipient.PropertiesType Specifies if the email address is the sender or therecipient. (Default: Sender

Name Specifies a symbolic name for the ALG. (Identifier)HostCert Specifies the host certificate.RootCert Specifies the root certificates. (Optional)Co

3.5. AntiVirusPolicyDescriptionAdd a Anti-Virus Profile that can be used by one or many IP Policies. The same Profile can be usedon all protocols that

Chapter 1: Introduction• Running a command, page 11• Help, page 12• Function keys, page 13• Command line history, page 14• Tab completion, page 15• Us

3.6. ApplicationRuleSetDescriptionList of Application RulesPropertiesName Specifies a symbolic name for the Profile.(Identifier)DefaultAction Default

3.7. ARPNDDescriptionUse an ARP/Neighbor Discovery entry to publish additional IP addresses and/or MAC addresseson a specified interface.PropertiesMod

3.8. ARPNDSettingsDescriptionAdvanced ARP/Neighbor Discovery-table settings.PropertiesARPMatchEnetSender The Ethernet Sender address matching thehardw

LogResolveFailure Specifies whether or not to log failed ARP Resolves.(Default: Yes)NDRateLimit Rate limit originated ND packets. (Default: 1000)MaxAn

AdvReachableTime The value to be placed in the Reachable Time fieldin the Router Advertisement messages SGW. Thevalue zero means unspecified. (Default

3.9. AuthAgentDescriptionThe Authentication Agent collect user login and logout events on a network domain controller.PropertiesName Specifies a symbo

3.10. AuthenticationSettingsDescriptionSettings related to Authentication and Accounting.PropertiesLogoutAccUsersAtShutdown Logout authenticated accou

3.11. BlacklistWhiteHostDescriptionHosts and networks added to this whitelist can never be blacklisted by IDP or Threshold Rules.PropertiesAddresses S

3.12. BNE2EthernetPCIDriverDescriptionBroadcom NE2 Gigabit Ethernet.PropertiesComments Text describing the current object. (Optional)NoteThis object t

3.13. BroadcomEthernetPCIDriverDescriptionBroadcom NE Gigabit Ethernet.PropertiesComments Text describing the current object. (Optional)NoteThis objec

1.2. Help1.2.1. Help for commandsThere are two ways of getting help about a command. A brief help is displayed if the commandname is typed followed by

3.14. CertificateDescriptionAn X. 509 certificate is used to authenticate a VPN client or gateway when establishing an IPsectunnel.PropertiesName Spec

3.15. COMPortDeviceDescriptionA serial communication port, that is used for accessing the CLI.PropertiesPort Port. (Identifier)BitsPerSecond Bits per

3.16. ConfigModePoolDescriptionAn IKE Config Mode Pool will dynamically assign the IP address, DNS server, WINS server etc. tothe VPN client connectin

3.17. ConnTimeoutSettingsDescriptionTimeout settings for various protocols.PropertiesConnLife_TCP_SYN Connection idle lifetime for TCP connections bei

3.18. DateTimeDescriptionSet the date, time and time zone information for this system.PropertiesTimeZone Specifies the time zone. (Default: GMT)DSTEna

3.19. DefaultInterfaceDescriptionA special interface used to represent internal mechanisms in the system as well as an abstract"any" interfa

3.20. DeviceDescriptionGlobal parameters for this device.PropertiesName Name of the device. (Default: Device)LocalCfgVersion Local version number of t

3.21. DHCPRelayDescriptionUse a DHCP Relay to dynamically alter the routing table according to relayed DHCP leases.PropertiesName Specifies a symbolic

LogSeverity Specifies with what severity log events will be sentto the specified log receivers. (Default: Default)Comments Text describing the current

3.22. DHCPRelaySettingsDescriptionAdvanced DHCP relay settings.PropertiesMaxTransactions Maximum number of concurrent BOOTP/DHCPtransactions. (Default

1.3. Function keysIn addition to the return key there are a number of function keys that are used in the CLI.Backspace Delete the character to the lef

3.23. DHCPServerDescriptionA DHCP Server determines a set of IP addresses and host configuration parameters to hand outto DHCP clients attached to a g

(Optional)LogEnabled Enable logging. (Default: Yes)LogSeverity Specifies with what severity log events will be sentto the specified log receivers. (De

NoteIf no Index is specified when creating an instance of this type, the object will be placedlast in the list and the Index will be equal to the leng

3.24. DHCPServerSettingsDescriptionAdvanced DHCP server settings.PropertiesAutoSaveLeasePolicy Policy for saving the lease database to disk.(Default:

3.25. DHCPv6ServerDescriptionA DHCPv6 Server determines a set of IPv6 addresses and host configuration parameters to handout to DHCPv6 clients attache

3.25.1. DHCPv6ServerPoolStaticHostDescriptionStatic DHCPv6 Server host entryPropertiesHost IPv6 Address of the host.MACAddress The hardware address of

3.26. DHCPv6ServerSettingsDescriptionAdvanced DHCPv6 server settings.PropertiesAutoSaveLeasePolicy Policy for saving the lease database to disk.(Defau

3.27. DNSDescriptionConfigure the DNS (Domain Name System) client settings.PropertiesDNSServer1 IP of the primary DNS Server. (Optional)DNSServer2 IP

3.28. DynamicRoutingRuleDescriptionA Dynamic Routing Policy rule creates a filter to catch statically configured or OSPF learnedroutes. The matched ro

last in the list and the Index will be equal to the length of the list.3.28.1. DynamicRoutingRuleExportOSPFDescriptionAn OSPF action is used to manipu

1.4. Command line historyEvery time a command is run, the command line is added to a history list. The up and downarrow keys are used to access previo

OffsetMetric Increases the metric by this value. (Optional)OffsetMetricType2 Increases the for Type2 routers metric by this value.(Optional)LimitMetri

3.29. DynDnsClientCjbNetDescriptionConfigure the parameters used to connect to the Cjb.net DynDNS service.PropertiesUsername Username.Password The pas

3.30. DynDnsClientDyndnsOrgDescriptionConfigure the parameters used to connect to the dyndns.org DynDNS service.PropertiesDNSName The DNS name excludi

3.31. DynDnsClientDynsCxDescriptionConfigure the parameters used to connect to the dyns.cx DynDNS service.PropertiesDNSName The DNS name excluding the

3.32. DynDnsClientPeanutHullDescriptionConfigure the parameters used to connect to the Peanut Hull DynDNS service.PropertiesDNSNames Specifies the DNS

3.33. E1000EthernetPCIDriverDescriptionIntel (E1000) Gigabit Ethernet Adaptor.PropertiesRxRingsize Rx ringsize. (Default: 64)TxRingsize Rx ringsize. (

3.34. E100EthernetPCIDriverDescriptionIntel (E100) Fast Ethernet Adaptor.PropertiesRxRingsize Rx ringsize. (Default: 32)TxRingsize Tx ringsize. (Defau

3.35. EthernetDescriptionAn Ethernet interface represents a logical endpoint for Ethernet traffic.PropertiesName Specifies a symbolic name for the int

switch route is added automatically for thisinterface. (Default: No)AutoInterfaceNetworkRoute Automatically add a route for this interface usingthe gi

3.36. EthernetDeviceDescriptionHardware settings for an Ethernet interface.PropertiesName Specifies a symbolic name for the device.(Identifier)Etherne

1.5. Tab completionBy using the tab function key in the CLI the names of commands, options, objects and objectproperties can be automatically complete

3.37. EthernetSettingsDescriptionSettings for Ethernet interface.PropertiesDHCP_MinimumLeaseTime Minimum lease time (seconds) accepted from theDHCP se

Ringsize_pcnet32_tx Size of pcnet32 transmit ring (per interface).(Default: 256)IfaceMon_e1000 Enable interface monitor for e1000 interfaces.(Default:

3.38. EventReceiverSNMP2cDescriptionA SNMP2c event receiver is used to receive SNMP events from the system.PropertiesName Specifies a symbolic name fo

3.39. FileControlPolicyDescriptionAdd a File Control Profile that can be used by one or many IP Policies. The same Profile can beused on all protocols

3.40. FragSettingsDescriptionSettings related to fragmented packets.PropertiesPseudoReass_MaxConcurrent Maximum number of concurrent fragmentreassembl

LogSuspect)IP6RejectBadFragLength Send Parameter Problem error upon reception offragments with bad data length. (Default: No)IP6IgnoreStubFrags Ignore

3.41. GRETunnelDescriptionA GRE interface is a Generic Routing Encapsulation (no encryption, no authentication, onlyencapsulation) tunnel over an exis

3.42. HighAvailabilityDescriptionConfigure the High Availability cluster parameters for this system.PropertiesEnabled Enable high availability. (Defau

3.43. HTTPALGBannersDescriptionHTTP banner files specifies the look and feel of HTTP ALG restriction web pages.PropertiesName Specifies a symbolic nam

3.44. HTTPAuthBannersDescriptionHTTP banner files specifies the look and feel of HTML authentication web pages.PropertiesName Specifies a symbolic nam

A more detailed help text about Address is displayed.1.5.2. Autocompleting Current and Default valueAnother special character that can be used togethe

3.45. HTTPPosterDescriptionUse the HTTP poster for dynamic DNS or automatic logon to services using web-basedauthentication.PropertiesURL The URL that

3.46. HWMDescriptionHardware Monitoring allows monitoring of hardware sensors.PropertiesName Specifies a symbolic name for the object.Type Type of mon

3.47. HWMSettingsDescriptionGeneral settings for Hardware MonitoringPropertiesEnableSensors Enable/disable all HWM functionality. (Default: No)SensorP

3.48. ICMPSettingsDescriptionSettings related to the ICMP protocol.PropertiesICMPSendPerSecLimit Maximum number of ICMP responses that will besent eac

3.49. IDListDescriptionAn ID list contains IDs, which are used within the authentication process when establishing anIPsec tunnel.PropertiesName Speci

3.50. IDPRuleDescriptionAn IDP Rule defines a filter for matching specific network traffic. When the filter criterion is met,the IDP Rule Actions are

DescriptionAn IDP Rule Action specifies what signatures to search for in the network traffic, and what actionto take if those signatures are found.Pro

3.51. IGMPRuleDescriptionAn IGMP rule specifies how to handle inbound IGMP reports and outbound IGMP queries.PropertiesIndex The index of the object,

NoteIf no Index is specified when creating an instance of this type, the object will be placedlast in the list and the Index will be equal to the leng

3.52. IGMPSettingDescriptionIGMP parameters can be tuned for one, or a group of interfaces in order to match thecharacteristics of a network.Propertie

Accessing an IP4Address object without the use of categories:Device:/> show IP4Address example_ipChapter 1: Introduction17

3.53. IKEAlgorithmsDescriptionConfigure algorithms which are used in the IKE phase of an IPsec session.PropertiesName Specifies a symbolic name for th

3.54. InterfaceGroupDescriptionUse an interface group to combine several interfaces for a simplified security policy.PropertiesName Specifies a symbol

3.55. IPPolicyDescriptionAn IP Policy specifies what action to perform on network traffic that matches the specified filtercriteria.PropertiesIndex Th

address to use.DestNewIP Specifies which destination address will be used.DestBaseIP Specifies base address for destination address.DestPortAction Spe

(Default: 300)WCF_AllowReclassification Allow reclassification of sites. (Default: No)URLFilter URL Filter. (Default: No)WC_Policy Selects preconfigur

3.56. IPPoolDescriptionAn IP Pool is a dynamic object which consists of IP leases that are fetched from a DHCP Server.The IP Pool is used as an addres

3.57. IPRuleDescriptionAn IP rule specifies what action to perform on network traffic that matches the specified filtercriteria.PropertiesIndex The in

(Default: 30)SLBMaxSlots Specifies maximum number of slots for IP andnetwork stickiness. (Default: 2048)SLBNetSize Specifies network size for network

SLBHTTPMaxAverageLatency Specifies the max average latency for the sampleattempts. (Default: 800)SLBHTTPURLType Defines how the request URL should bei

3.58. IPRuleFolderDescriptionAn IP Rule Folder can be used to group IP Rules into logical groups for better overview andsimplified management.Properti

1.6. User rolesSome commands and options cannot be used unless the logged-in user has administratorprivileges. This is indicated in this guide by a no

3.59. IPRuleSetDescriptionAn IP Rule Set is a self-contained set of IP Rules. Default action is Drop.PropertiesName A name to uniquely identify this I

3.60. IPsecAlgorithmsDescriptionConfigure algorithms which are used in the IPsec phase of an IPsec session.PropertiesName Specifies a symbolic name fo

XCBCEnabled Enable XCBC-AES integrity algorithm. (Default: No)Comments Text describing the current object. (Optional)Chapter 3: Configuration Referenc

3.61. IPsecTunnelDescriptionAn IPsec tunnel item is used to define IPsec endpoint and will appear as a logical interface in thesystem.PropertiesIndex

LocalIDValue Specify the local identity of the tunnel ID.GatewayCertificate Selects the certificate the security gateway uses toauthenticate itself to

the given remote network. (Default: Yes)LocalEndpoint Specifies on which local address this tunnel shouldaccept incoming IKE/IPsec traffic. (Optional)

3.62. IPsecTunnelSettingsDescriptionSettings for the IPsec tunnel interfaces used for establishing IPsec VPN connections to and fromthis system.Proper

IPsecDisablePKAccel Disable hardware acceleration for public-keyoperations. (Default: No)AESNIEnable Enable AES-NI acceleration for processors thatsup

3.63. IPSettingsDescriptionSettings related to the IP protocol.PropertiesEnableIPv6 Enable processing of IPv6 traffic. (Default: No)LogDropOnForwardHo

IP6OPT_RA Validate Router Alert packets. (Default: Ignore)IP6OPT_HA Validate Home Address option packets. (Default:Ignore)IP6OPT_OTH Validate unknown

Chapter 1: Introduction19

IPOPT_SR How to handle IP packets with contained source orreturn routes. (Default: DropLog)IPOPT_TS How to handle IP packets with containedTimestamps.

3.64. ixgbeEthernetPCIDriverDescriptionIntel (IXGBE) 10 Gigabit Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)Note

3.65. IXP4NPEEthernetDriverDescriptionIntel (IXP4xxNPE) Fast Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)NoteThi

3.66. L2TPClientDescriptionA PPTP/L2TP client interface is a PPP (Point-to-Point Protocol) tunnel over an existing IP network.Its IP address and DNS s

MPPERC440 Use an RC4 40 bit MPPE session key with MS-CHAPor MS-CHAP v2 authentication protocol. (Default:Yes)MPPERC456 Use an RC4 56 bit MPPE session

3.67. L2TPServerDescriptionA PPTP/L2TP server interface terminates PPP (Point to Point Protocol) tunnels set up over existingIP networks.PropertiesNam

Servers (NBNS) to assign IP addresses to NetBIOSnames. (Optional)AllowedRoutes Restricts networks for which routes mayautomatically be added. (Default

3.68. L2TPServerSettingsDescriptionPPTP/L2TP server settings.PropertiesL2TPBeforeRules Pass L2TP connections sent to the security gatewaydirectly to t

3.69. L2TPv3ServerDescriptionA L2TPv3 server interface terminates L2 (Ethernet and VLAN) tunnels set up over existing IPnetworks.PropertiesName Specif

3.70. LDAPDatabaseDescriptionExternal LDAP server used to verify user names and passwords.PropertiesName Specifies a symbolic name for the server.(Ide

Clavister cOS CoreCLI Reference GuideVersion: 10.20.02Published 2014-03-31Copyright © 2014 Clavister ABCopyright NoticeThis publication, including all

Chapter 2: Command Reference• Configuration, page 20• Runtime, page 31• Utility, page 84• Misc, page 852.1. Configuration2.1.1. activateActivate chang

3.71. LDAPServerDescriptionAn LDAP server is used as a central repository of certificates and CRLs that the security gatewaycan download when necessar

3.72. LengthLimSettingsDescriptionLength limitations for various protocols.PropertiesMaxTCPLen TCP; Sometimes has to be increased if tunnelingprotocol

3.73. LinkAggregationDescriptionA Link Aggregation interface combines multiple Ethernet interfaces into a single logicalendpoint.PropertiesName Specif

when IPv6 is enabled. (Default: 1500)Metric Specifies the metric for the auto-created route.(Default: 100)DHCPEnabled Enable DHCP client on this inter

3.74. LinkMonitorDescriptionThe Link Monitor allows the system to monitor one or more hosts and take action if they areunreachable.PropertiesAction Sp

3.75. LocalReassSettingsDescriptionParameters use for local fragment reassembly.PropertiesLocalReass_MaxConcurrent Maximum number of concurrent localr

3.76. LocalUserDatabaseDescriptionA local user database contains user accounts used for authentication purposes.PropertiesName Specifies a symbolic na

3.77. LogReceiverFWLogDescriptionA FWLog receiver is used to receive log events from the system in the FWlog format.PropertiesName Specifies a symboli

3.78. LogReceiverMemoryDescriptionA memory log receiver is used to receive and keep log events in system RAM.PropertiesName Specifies a symbolic name

3.79. LogReceiverSMTPDescriptionAn SMTP event receiver is used for receiving emails for IDP events.PropertiesName Specifies a symbolic name for the lo

DescriptionCreate a new object and add it to the configuration.Specify the type of object you want to create and the identifier, if the type has one,

3.80. LogReceiverSyslogDescriptionA Syslog receiver is used to receive log events from the system in the standard Syslog format.PropertiesName Specifi

3.81. LogSettingsDescriptionAdvanced log settings.PropertiesLogSendPerSecLimit Limits how many log packets the security gatewaymay send out per second

3.82. LoopbackInterfaceDescriptionLoopback interfaces will take all packets sent through them and pass them back up a differentinterface as newly rece

3.83. MarvellEthernetPCIDriverDescriptionMarvell (88E8001,88E8053,88E8062) Fast and Gigabit Ethernet Adaptor.PropertiesComments Text describing the cu

3.84. MiscSettingsDescriptionMiscellaneous SettingsPropertiesUDPSrcPort0 How to treat UDP packets with source port 0.(Default: DropLog)Port0 How to tr

NoteThis object type does not have an identifier and is identified by the name of the typeonly. There can only be one instance of this type.Chapter 3:

3.85. MulticastSettingsDescriptionAdvanced Multicast Settings.PropertiesAutoAddMulticastCoreRoute Auto generate core route for"224.0.0.1-239.255.

3.86. NATPoolDescriptionA NAT Pool is used for NATing multiple concurrent connections to using different source IPaddresses.PropertiesName Specifies a

3.87. OSPFProcessDescriptionAn OSPF Router Process defines a group of routers exchanging routing information via the OpenShortest Path First routing p

DebugDDesc Enables or disabled logging of databasedescription packets and also specifies the details ofthe log. (Default: Off)DebugExchange Enables or

2.1.3. cancelCancel ongoing commit.DescriptionCancel commit operation immediately, without waiting for the timeout.UsagecancelNoteRequires Administrat

StubMetric Route metric for stub area. (Optional)FilterExternal Specifies the network addresses allowed to beimported into this area from external rou

router will be declared to be down. (Default: 40)RxmtInterval Specifies the number of seconds betweenretransmissions of LSAs to neighbors on thisinter

DescriptionAn aggregate is used to replace any number of smaller networks belonging to the local (intra)area with one contiguous network which may the

3.88. PipeDescriptionA pipe defines basic traffic shaping parameters. The pipe rules then determines which trafficgoes through which pipes.PropertiesN

precedence 7 (the highest precedence). (Optional)LimitPPS7 Specifies the packet per second limit forprecedence 7 (the highest precedence). (Optional)U

GroupingNetworkSize If users are grouped according to source ordestination network, the size of the network has tobe specified by this setting. (Defau

3.89. PipeRuleDescriptionA Pipe Rule determines traffic shaping policy - which Pipes to use - for one or more types oftraffic with the same granularit

3.90. PPPoETunnelDescriptionA PPPoE interface is a PPP (point-to-point protocol) tunnel over an existing physical Ethernetinterface. Its IP address is

Metric Specifies the metric for the auto-created route.(Default: 90)AutoInterfaceNetworkRoute Automatically add a route for this interface usingthe gi

3.91. PPPSettingsDescriptionSettings related to the PPP protocol.PropertiesInitialResendTime Initial time in milliseconds to wait before sending anew

Change the current context.cc -printPrint the current context.ccChange to root context (same as "cc /").Options-print Print the current cont

3.92. PSKDescriptionPSK (Pre-Shared Key) authentication is based on a shared secret that is known only by the partiesinvolved.PropertiesName Specifies

3.93. R8139EthernetPCIDriverDescriptionRealTek (8139) Fast Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)NoteThis

3.94. R8169EthernetPCIDriverDescriptionRealTek (8169,8110) Gigabit Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)N

3.95. RadiusAccountingDescriptionExternal RADIUS server used to collect user statistics.PropertiesName Specifies a symbolic name for the server.(Ident

3.96. RadiusRelayDescriptionRADIUS relay for intercepting packets from a user endpoint and sending packets to a remoteRADIUS server.PropertiesName Spe

RoutingTable Specifies the routing table the clients host routeshould be added to. (Default: main)Comments Text describing the current object. (Option

3.97. RadiusServerDescriptionExternal RADIUS server used to verify user names and passwords.PropertiesName Specifies a symbolic name for the server.(I

3.98. RealTimeMonitorAlertDescriptionMonitors a statistical value. Log messages are generated if the value goes below the lowerthreshold or above the

3.99. RemoteIDListDescriptionList of Remote IDs that are allowed access when using Pre Shared Keys as authenticationmethod.PropertiesType Specifies th

3.100. RemoteMgmtHTTPDescriptionConfigure HTTP/HTTPS management to enable remote management to the system.PropertiesName Specifies a symbolic name for

activated.See also: undeleteExample 2.3. Delete an objectDelete an unreferenced object:gw-world:/> delete Address IP4Address example_ipDelete a ref

3.101. RemoteMgmtNetconDescriptionConfigure Netcon management to enable remote management to the system.PropertiesName Specifies a symbolic name for t

3.102. RemoteMgmtSettingsDescriptionSetup and configure methods and permissions for remote management of this system.PropertiesNetconBiDirTimeout Spec

LocalConsoleIdleTimeout Number of seconds of inactivity until the localconsole user is automatically logged out. (Default:900)WebUIIdleTimeout Number

3.103. RemoteMgmtSNMPDescriptionConfigure SNMP management to enable SNMP polling.PropertiesName Specifies a symbolic name for the object.(Identifier)I

3.104. RemoteMgmtSSHDescriptionConfigure a Secure Shell (SSH) Server to enable remote management access to the system.PropertiesName Specifies a symbo

password has to be provided within this number ofseconds or the session will be closed. (Default: 30)AuthenticationRetries The number of retires allow

3.105. RouteBalancingInstanceDescriptionA route balancing instance is assoicated with a routingtable and defines how to make use ofmultiple routes to

3.106. RouteBalancingSpilloverSettingsDescriptionSettings associated with the spillover algorithm.PropertiesInterface Interface to threshold limit. (I

3.107. RouterAdvertisementDescriptionEnabling Router Advertisement will answer Solicitations and periodically send outAdvertisements. Stateless addres

sent. (Default: 0). (Default: 0)Comments Text describing the current object. (Optional)NoteIf no Index is specified when creating an instance of this

Options-comments=<String> Comments for this key.-size={64 | 128 | 256 | 512 | 1024 | 2048 |4096}Number of bits of data in the generated key.(Def

3.108. RoutingRuleDescriptionA Routing Rule forces the use of a routing table in the forward and/or return direction of trafficon a connection. The or

3.109. RoutingSettingsDescriptionConfigure the routing capabilities of the system.PropertiesRouteFailOver_IfacePollInterval Time (ms) between polling

Transparency_ATSExpire Lifetime of an unanswered ATS entry in seconds.(Default: 3)Transparency_ATSSize Number of ATS entries, total. (Default: 4096)Nu

3.110. RoutingTableDescriptionThe system has a predefined main routing table. Alternate routing tables can be defined by theuser.PropertiesName Specif

MonitorGateway Mark the route as down if the next hop does notanswer on ARP lookups during a specified time.(Default: No)MonitorGatewayManualARP Enabl

monitoring to be successful. (Default: No)Samples Specifies the number of attempts to use forstatistical calculations. (Default: 10)MaxPollFails Speci

(Default: No)ProxyNDInterfaces Specifies the interfaces on which the securitygateway should publish routes via Proxy ARP.(Optional)Comments Text descr

3.111. ScheduleProfileDescriptionA Schedule Profile defines days and dates and are then used by the various policies in thesystem.PropertiesName Speci

3.112. ServiceGroupDescriptionA Service Group is a collection of service objects, which can then be used by different policies inthe system.Properties

3.113. ServiceICMPDescriptionAn ICMP Service is an object definition representing ICMP traffic with specific parameters.PropertiesName Specifies a sym

Usagereject [<Category>] <Type> [<Identifier>] [-recursive]Reject changes made to the specified object.reject -allReject all changes

Protocol Protocol settings are only used by IP Policies.(Optional)MaxSessionsProtocol Specifies how many concurrent sessions that arepermitted using t

3.114. ServiceICMPv6DescriptionAn IPv6-ICMP Service is an object definition representing IPv6-ICMP traffic with specificparameters.PropertiesName Spec

ALG An Application Layer Gateway (ALG), capable ofmanaging advanced protocols, can be specified forthis service. (Optional)MaxSessions Specifies how m

3.115. ServiceIPProtoDescriptionAn IP Protocol Service is a definition of an IP protocol with specific parameters.PropertiesName Specifies a symbolic

3.116. ServiceTCPUDPDescriptionA TCP/UDP Service is a definition of an TCP or UDP protocol with specific parameters.PropertiesName Specifies a symboli

3.117. SSHClientKeyDescriptionThe public key of the client connecting to the SSH server.PropertiesName Specifies a symbolic name for the key. (Identif

3.118. SSLSettingsDescriptionSettings related to SSL (Secure Sockets Layer).PropertiesSSL_ProcessingPriority The amount of of CPU time that SSL proces

3.119. SSLVPNInterfaceDescriptionAn SSL VPN interface, together with the bundled client, creates an easy to use tunnel solution forroaming users.Prope

3.120. SSLVPNInterfaceSettingsDescriptionSSL VPN interface settings.PropertiesSSLVPNBeforeRules Pass SSL VPN connections sent to the securitygateway d

3.121. ST201EthernetPCIDriverDescriptionD-Link (ST201) Fast Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)NoteThis

-unit Reset unit to factory defaults.NoteRequires Administrator privilege.2.1.10. setSet property values.DescriptionSet property values of configurati

3.122. StateSettingsDescriptionParameters for the state engine in the system.PropertiesConnReplace What to do when the connection table is full.(Defau

3.123. TCPSettingsDescriptionSettings related to the TCP protocol.PropertiesTCPOptionSizes Validity of TCP header option sizes. (Default:ValidateLogBa

TCPSynUrg The TCP URG flag together with SYN; normallyinvalid (strip=strip URG). (Default: DropLog)TCPSynPsh The TCP PSH flag together with SYN; norma

3.124. ThresholdRuleDescriptionA Threshold Rule defines a filter for matching specific network traffic. When the filter criterion ismet, the Threshold

ThresholdUnit Specifies the threshold unit. (Default: ConnsSec)BlackList Activate BlackList. (Default: No)BlackListTimeToBlock The number of seconds t

3.125. TulipEthernetPCIDriverDescriptionTulip Fast Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)NoteThis object t

3.126. UpdateCenterDescriptionConfigure automatical updates.PropertiesAVEnabled Automatic updates of antivirus definitions andengine. (Default: No)IDP

3.127. URLFilterPolicyDescriptionAdd a URL Filtering Profile that can be used by one or many IP Policies. Only the HTTP Protocolhave support for URL F

3.128. UserAuthRuleDescriptionThe User Authentication Ruleset specifies from where users are allowed to authenticate to thesystem, and how.PropertiesI

HTTPBanners HTTP Authentication HTML Banners. (Default:Default)RealmString The string that is presented as a part of the 401 -Authentication Required

<Category> Category that groups object types.<Identifier> The property that identifies the configurationobject. May not be applicable depe

PacketsReceived Enable reporting of the number of packetsreceived by the user. (Default: Yes)SessionTime Enable reporting of the number of seconds the

3.129. VLANDescriptionUse a VLAN to define a virtual interface compatible with the IEEE 802.1Q Virtual LAN standard.PropertiesName Specifies a symboli

EnableRouterAdvertisement Enable Router Advertisement for this interface.(Default: No)MemberOfRoutingTable All or Specific. (Default: All)RoutingTable

3.130. VLANSettingsDescriptionSettings for IEEE 802.1Q based Virtual LAN interfaces.PropertiesUnknownVLANTags VLAN packets tagged with an unknown ID.(

3.131. WebContentFilteringPolicyDescriptionAdd a Web Content Filtering Profile that can be used by one or many IP Policies. Only the HTTPProtocol have

3.132. X3C905EthernetPCIDriverDescription3com Fast Ethernet Adaptor.PropertiesComments Text describing the current object. (Optional)NoteThis object t

Chapter 3: Configuration Reference286

Alphabetical IndexCommandsAabout, 31activate, 20add, 20alarm, 31appcontrol, 31arp, 32arpsnoop, 33ats, 34authagent, 34authagentsnoop, 35Bblacklist, 35b

selftest, 71services, 73sessionmanager, 73set, 27settings, 75show, 28shutdown, 75sipalg, 76sshserver, 78sslvpn, 78stats, 79sysmsgs, 79Ttechsupport, 79

IP6Address, 95, 98IP6Group, 95, 98IPPolicy, 172, 179, 180IPPool, 175IPRule, 176, 179, 180IPRuleFolder, 179, 180IPRuleSet, 180IPsecAlgorithms, 181IPsec

gw-world:/> show Address IP4Address example_ipgw-world:/main> show Route 1gw-world:/> show Client DynDnsClientDyndnsOrgShow a table of all ob

Clavister ABSjögatan 6JSE-89160 ÖrnsköldsvikSWEDENPhone: +46-660-299200www.clavister.com

Table of ContentsPreface ... 91. Introduc

Restore previously deleted objects.DescriptionRestore a previously deleted object.This is possible as long as the activate command has not been called

2.2. Runtime2.2.1. aboutShow copyright/build information.DescriptionShow copyright and build information.Usageabout2.2.2. alarmShow alarm information.

appcontrolShow general information about application control system.appcontrol -show_listsList information about specified application.appcontrol -del

The presented list can be filtered using the ip and hw options.UsagearpShow all ARP entries.arp -show [<Interface>] [-ip=<pattern>] [-hw=&

UsagearpsnoopShow snooped interfaces.arpsnoop {ALL | NONE | <interface>} [-verbose]Snoop specified interface.Options-verbose Verbose.{ALL | NONE

authagent {ALL | <AuthAgent>}Shows the state of the configured Authentication Agents.authagent -reconnect {ALL | <AuthAgent>}Closes the co

Note: Static blacklist hosts cannot be unblocked.If -force is not specified, only the exact host with the service, protocol/port and destinyspecified

-show Show information about the blacklisted hosts.-time=<seconds> The time that the host will remain blocked.-unblock Unblock specified netobje

Show CAM table information.cam <Interface> [-num=<n>]Show interface-specified CAM table information.cam <Interface> [-flush]Flush CA

cfglog2.2.14. connectionsList current state-tracked connections.DescriptionList current state-tracked connections.Usageconnections -show [-num=<n&g

2.2.29. httpalg ... 472.2.30. httpposter ...

-verbose Verbose (more information).2.2.15. cpuidDisplay info about the cpu.DescriptionDisplay the make and model of the machine's CPU.Usagecpuid

2.2.18. dconsoleDisplays the content of the diagnose console.DescriptionThe diagnose console is used to help troubleshooting internal problems within

Options-lease={RENEW | RELEASE} Modify interface lease.-list List all DHCP enabled interfaces.-show Show information about DHCP enabled interface.<

Show content of the DHCP server ruleset.DescriptionShow the content of the DHCP server ruleset and various information about active/inactiveleases.Dis

Show content of the DHCPv6 server ruleset.DescriptionShow the content of the DHCPv6 server ruleset and various information about active/inactiveleases

dns [-query=<domain name>] [-list] [-remove]Options-list List pending DNS queries.-query=<domain name> Resolve domain name.-remove Remove

Options-exports Show current exports.-rules Show dynamic routing, filter ruleset.2.2.26. fragsShow active fragment reassemblies.DescriptionList active

DescriptionShow current HA status.Usageha [-activate] [-deactivate]Options-activate Go active.-deactivate Go inactive.2.2.28. hostmonShow Host Monitor

List or flush hosts that have overridden the wcf filter.httpalg -wcfcache [-show] [-url=<String>] [-flush] [-verbose][-count] [-server[={STATUS

Show hardware monitor sensor status.Usagehwm [-all] [-verbose]Options-all Show ALL sensors, WARNING: use at own risk, maytake long time for highspeed

2.4.4. ls ... 862.4.5. script ...

DescriptionShow list of attached interfaces, or in-depth information about a specific interface.Usageifstat [<Interface>] [-filter=<expr>]

igmp -leave <Interface> <MC address> [<host address>]Simulate an incoming IGMP leave message.Options-join Simulate an incoming IGMP

-verbose Enable IKE snooping with verbose output.<ip address> IP address to snoop.2.2.37. ippoolShow IP pool information.DescriptionShow informa

ipsecdefines2.2.39. ipsecglobalstatsShow global ipsec statistics.DescriptionList global IPsec statistics.Usageipsecglobalstats -mem [-verbose]Start IK

2.2.41. ipsecstatsShow the SAs in use.DescriptionList the currently active IKE and IPsec SAs, optionally only showing SAs matching the patterngiven fo

Show interfaces.Options-force Bypass confirmation question.-iface=<recv iface> IPsec interface to show information about.-num={ALL | <Integer

languagefilesShow all language files on disk.languagefiles -remove=<String>Remove a language file from disk.Options-remove=<String> Specif

DescriptionShow contents of the license file.Usagelicense -show [-remove]Manages license.license -activate [-request] [-username=<String>][-pass

Usagelinkmon2.2.48. logoutLogout user.DescriptionLogout current user.Usagelogout2.2.49. memoryShow memory information.DescriptionShow core memory cons

Options-num=<Integer> Maximum number of items to list (default: 20).-verbose Verbose (more information).<IP4 Address> Translated IP.<po

3.35. Ethernet ... 1473.36. EthernetDevice ...

-hashinfo Show information on hash table health.-hw=<pattern> Show only hardware addresses matching pattern.-ip=<pattern> Show only IP add

Usagenetcon2.2.54. netobjectsShow runtime values of network objects.DescriptionDisplays named network objects and their contents.Example 2.10. List ne

Show interface information.ospf -area [<OSPF Area>] [-process=<OSPF Router Process>]Show area information.ospf -neighbor [<OSPF Neighbo

-verbose Increase amount of information to display.<interface> OSPF enabled interface.<interface> OSPF enabled interface.<lsaID> LSA

pcapdump -cleanupRemove all captured packets, release capture mode and delete all written capture files from disk.Options-cleanup Remove all captured

-write Write the captured packets to disk.<interface(s)> Name of interface(s).NoteRequires Administrator privilege.2.2.57. pciscanShow detected

ST201 | TULIP | X3C905} Interface driver to use.2.2.58. pipesShow pipes information.DescriptionShow list of configured pipes / pipe details / pipe use

pptpalg -sessions <PPTP ALG> [-verbose] [-num=<Integer>]List all PPTP sessions.pptpalg -services <PPTP ALG>List all services attache

rekeysa -ipsec <ip address>Rekey IPsec SAs.rekeysa <ip address>Rekey IPsec SAs.Options-ike Rekey IKE SAs.-ipsec Rekey IPsec SAs.<ip add

Note that "core" routes for interface IP addresses are not normally shown. Use the -all switchto show core routes also.Use the -switched swi

3.84. MiscSettings ... 2143.85. MulticastSettings ...

If the option "monitored" is specified, only objects that have an associated real-time monitoralert are displayed.Example 2.11. Show all mon

-ruleset={* | MAIN | <IP Rule Set>} Show a specified IP ruleset.-schedule Filter out rules that are not currently allowed byselected schedules.-

Usageselftest -memory [-num=<Integer>]Check the sanity of the RAM.selftest -media [-size=<Integer>]Check the sanity of the disk drive.self

-media Check the sanity of the disk drive.-memory Check the sanity of the RAM.-minutes[=<Integer>] Test duration in minutes. (Default: 0)-num=&l

Session Manager.DescriptionShow information about the Session Manager, and list currently active users.Explanation of Timeout flags for sessions:D Ses

<message text> Message to send.<session name> Name of session.{LOCAL | SSH | NETCON | HTTP | HTTPS} Session type.2.2.70. settingsShow sett

NoteRequires Administrator privilege.2.2.72. sipalgSIP ALG.DescriptionList running SIP-ALG configurations, SIP registration and call information.The -

NOTE: 'verbose' option outputs a lot of information on the console which may lead to systeminstability. Use with caution.Usagesipalg -defini

<ipaddr> IP Address to snoop.2.2.73. sshserverSSH Server.DescriptionShow SSH Server status, or start/stop/restart SSH Server.UsagesshserverShow

SSLVPN tunnels.DescriptionList running SSLVPN configurations, SSLVPN active tunnels and call information.Usagesslvpn [-num=<n>]Options-num=<n

List of Examples1. Command option notation ... 91.1. Help for commands .

DescriptionGenerate information useful for technical support.Due to the large amount of output, this command might show a truncated result when execut

Show user authentication rules.DescriptionDisplays the contents of the user authentication ruleset.Example 2.17. Show a range of rulesuarules -v 1-2,4

Show status of update servers.Options-removedb={ANTIVIRUS | IDP} Remove the database for the specified service.-servers Show autoupdate server informa

-remove Forcibly log out an authenticated user. (Adminonly)-user Show all information for user(s) with this IPaddress.<Interface> Interface.<

2.3. Utility2.3.1. pingPing host.DescriptionSends one or more ICMP ECHO, TCP SYN or UDP datagrams to the specified IP address of a host.All datagrams

2.4. Misc2.4.1. echoPrint text.DescriptionPrint text to the console.Example 2.18. Hello Worldecho Hello WorldUsageecho [<String>]...Options<S

Display help about selected topic from any category.help -category={COMMANDS | TYPES} [<Topic>]Display help from a specific topic category.Optio

Example 2.21. Upload certificate datascp certificate.cer user@sgw-ip:certificate/certificate_namescp certificate.key user@sgw-ip:certificate/certifica

Execute script.script -show [-all] [-name=<Name>]Show script in console window.script -store [-all] [-name=<Name>]Store a script to persis

Chapter 2: Command Reference89

PrefaceAudienceThe target audience for this reference guide is:• Administrators that are responsible for configuring and managing the Clavister Securi

Chapter 3: Configuration Reference• Access, page 94• Address, page 95• AdvancedScheduleProfile, page 99• ALG, page 100• AntiVirusPolicy, page 109• App

• DHCPServerSettings, page 133• DHCPv6Server, page 134• DHCPv6ServerSettings, page 136• DNS, page 137• DynamicRoutingRule, page 138• DynDnsClientCjbNe

• IPPool, page 175• IPRule, page 176• IPRuleFolder, page 179• IPRuleSet, page 180• IPsecAlgorithms, page 181• IPsecTunnel, page 183• IPsecTunnelSettin

• Pipe, page 223• PipeRule, page 226• PPPoETunnel, page 227• PPPSettings, page 229• PSK, page 230• R8139EthernetPCIDriver, page 231• R8169EthernetPCID

• SSLVPNInterfaceSettings, page 268• ST201EthernetPCIDriver, page 269• StateSettings, page 270• TCPSettings, page 271• ThresholdRule, page 273• TulipE

3.2. AddressThis is a category that groups the following object types.3.2.1. AddressFolderDescriptionAn address folder can be used to group related ad

3.2.1.3. EthernetAddressDescriptionUse an Ethernet Address item to define a symbolic name for an Ethernet MAC address.PropertiesName Specifies a symbo

authentication, but has no credentials (user namesor groups) defined. This means that the object onlyrequires that a user is authenticated, but ignore

NoDefinedCredentials If this property is enabled the object requires userauthentication, but has no credentials (user namesor groups) defined. This me

3.3. AdvancedScheduleProfileDescriptionAn advanced schedule profile contains definitions of occurrences used by various policies in thesystem.Properti